How to Install a Ghost Immobiliser
Ghost immobilisers are an effective deterrent to car thieves. Combining this device with other security devices and remaining vigilant can help you create an effective defense against the modern, tech skilled thieves.
A ghost immobiliser will protect your car from hotwiring and relay car thefts by requiring you to enter an identification number to start the vehicle. It uses existing buttons located in your centre console or steering wheel, which means it is undetectable to thieves.
Identifying the Wires
It is essential to secure your vehicle as more vehicles are stolen without the owner's key. While thieves might be able to clone your key fob, or even steal the car by hacking its system, a ghost immobiliser adds an extra layer of security by blocking all signals coming from the key fob and making it impossible to start your vehicle without entering a PIN code.
You can install the ghost immobiliser on your own, however it is better to hire a professional to do the job. A professional technician will know the best place to install the device and how to connect it to your vehicle's wiring. Installation can be complicated, and it's important that all connections are made correctly to avoid any damage or malfunctions.
To get the best results, you should be in a well-lit space and wear the appropriate safety equipment. You should also read through the user manual and familiarise yourself with the wiring system. This will help you identify the wires required for the installation and make sure that you have the correct equipment and components to complete the job right.
Once the wiring has been connected, you are able to reconnect your battery and test to see if the system is working correctly. Also, ensure that the battery's terminals are secured to avoid electrical issues. You should also label the CAN L and CAN H wires with labels or tape so that you are capable of keeping track of them during the installation process.
The Ghost Immobiliser allows you to put your vehicle into Transport Mode if you want someone other than you to drive it temporarily such as for valet parking, or when the vehicle requires serviced. It allows you to enter the code through a service button located on the steering wheel, center console or door panels and then it will enter PIN mode to change the code.
Some thieves try to bypass ghost immobilisers through jamming or spoofing devices that block or send fake messages to the system. This can be avoided by investing in anti-jamming technology and by regularly checking your Ghost immobiliser for indications that it has been altered with.
Disconnecting the Battery
The ghost immobiliser, a advanced security device, is designed to prevent car theft. It makes use of cutting-edge technology to detect the engine and then deactivate it when the correct PIN is entered. This prevents the vehicle from being stolen by thieves. The system is very efficient and discreet. It does not have visible indicators that could deter criminals. However, t here may come an occasion when you have to remove the device, whether for maintenance or upgrades, or to sell your car.
This process requires special tools and skills because you'll be working with wires and bypassing certain factory parts. It is also important to follow the step by instruction provided by the manufacturer. It is also recommended to consult an expert mechanic or auto electrician particularly if you don't have any experience working on cars.
After identifying the wires and disconnection, it is important to verify the condition of your battery. Ensure that it is clean and free of corrosion and that the connections are secure. If necessary, consider replacing the battery to ensure it is sturdy enough to handle the electrical demands of an aftermarket security system.
After you have disconnected the wiring you can remove the ghost immobiliser. Use strippers or wire cutters to carefully disconnect the wires, making sure not to scratch the wires or their terminals. Make sure you label each wire so that you can reconnect them properly in the future. If the wires are soldered together, use a heat resistant tool to break the connection. To avoid short-circuits, it is essential to wrap the wires in insulation tape or heat shrink tubing.
Connect the wires back to the 12V constant power source. If necessary, use a fuse tap to make sure that the connections are protected by fuse. Connect the grounding wire with an adequate grounding on the vehicle's chassis.
After reconnecting the wires, turn on your vehicle and enter the PIN. Then, start the engine. If it does not start then the ghost immobiliser has been successfully removed.
Making Connections
A ghost immobiliser can be an affordable method to improve the safety and security of your vehicle. It works by connecting to the CAN bus system in your vehicle, capturing signals, and preventing the vehicle from starting until the right PIN code has been entered. This device is practically impossible to bypass which makes it a perfect option for drivers who need extra security and peace of mind. It can reduce your insurance rates when used in conjunction with an Thatcham Approved Tracking System.
Obtaining and reviewing the wiring diagram of your vehicle model will be essential to the installation process. The diagram serves as a guideline to identify the wires needed for precise connections. Using the proper connections or soldering techniques will ensure that the connection is strong and secure.
The wires connecting the Ghost immobiliser with the CAN bus need to be identified correctly and connected. Use small labels or tape to label the CAN L and H wires. This will prevent confusion during installation. The wires are positioned in different locations on every vehicle. It is crucial to look up the wiring diagram or online resources to determine them.
After the correct wires are connected, the power to the Ghost immobiliser can be restored. It is a good idea to test the immobiliser. Start the engine, but do not enter the code. This will ensure that the immobiliser is installed correctly and functioning as intended. It is a good idea to test your immobiliser frequently and aid in identifying any issues or problems early on.
Another benefit of the ghost immobiliser is that it can be set up in a matter of minutes and does not require any cutting or modification to your vehicle's internal wiring. It is also an excellent option for those looking to add extra security to their vehicles as it can be utilized in conjunction with a Thatcham-approved alarm or tracker that will notify your phone or tablet whenever the vehicle is tampered with.
Mounting the Unit
The Ghost immobiliser is a fantastic deterrent against car thieves, especially when it is paired with a GPS tracking system. It uses buttons in the centre console, door panels and steering wheel to generate a unique sequence that only you recognise to stop your vehicle from beginning. The unit is also weatherproof and tamper-proof. It also comes with a three-year guarantee and is recommended by a number of insurance companies.
It is crucial to adhere to the steps during the installation process. If you're unsure about the installation, you should seek out an expert. Multimeters and wire strippers are vital tools to determine the wiring and create precise connections. It is also recommended to purchase electrical tape and insulation to shield the connections from damage. Once the installation is complete it's a good idea to check the device to confirm that it's functioning as intended.
Ghost immobilisers are a great option to protect your vehicle especially in areas with high crime rates. It can be paired up with an iPhone application to make it easy to manage and monitoring. It blocks key cloning as well as ECU swapping and other security threats. It's a popular choice for those who own vehicles looking to protect their investment, and is easy to install.
The Ghost II immobiliser is designed in a low-profile, sleek appearance that makes it invisible to thieves. It is connected to the CAN (Controller Area Network) system of your vehicle and blocks the engine from starting without a PIN code being entered. The PIN code is generated by pressing a series of buttons on your steering wheel or console, or even your door. It can also be changed at any point. The device is also tamper-proof and includes a GPS tracker that can help police locate your vehicle in the event of a car theft. It's a great choice to protect your vehicle from thiefs and it's fully Thatcham-approved.